Single Pulse Trigger

 
Image:single_pulse_trigger.jpg

The Single Pulse Trigger will set its output high, in response to its input going high and remain high for a pre-defined period.

The behaviour of this Logic Object can be set to one of three modes:

  • "Ignore input during pulse" means that the logic object will behave as it has been set up regardless of any changes to the input during the set period for the pulse.

  • "Restart pulse on low to high" will restart the pulse period at any point when the input is taken high again.

  • "Cancel pulse on high to low" will immediately set the output to LOW (0) upon the input going LOW (0) again.

 

Properties

Image:single_pulse_trigger_properties.jpg

 
Off Time (x 100ms)

Sets the time before the output turns on (HIGH) in steps of 100ms, e.g. 1=100ms

On Time (x 100ms)

Sets the time that the output remains on (HIGH) in steps of 100ms, e.g. 1=100ms

Behaviour

Sets the mode of operation to "Ignore input during pulse", "Cancel pulse on high to low" or "Restart pulse on low to high".

Image:SinglePulseStateDiagram.jpg